Acrylic Washi Stand

Acrylic Washi Stands are perfect for holding your washi rolls in style. Our custom stands are made of double board acrylic with a custom shaped and designed base.  

Two sided printing for the top piece + single sided printing on the base, double board (two pieces of plastic) in all sections.

Pricing is based on the total size (height & width) Pick your height and then choose the width.  If you are unsure of the size of your art, please email it to us to check out.

*The total size includes the 3mm bleed (6mm when counting left/right both having it) of added clear plastic to the edge around it (reducing the size of the print by 0.25").  For instance, if you asked for 6" (152.4mm), your art would be 146 mm (5.75") + the 0.25"(6mm) of edges. 

Any size or quantity can be made, but for orders over 300 pieces or ones with additional pieces, please email for an exact quote.

These are printed in full color and we can use gradients and as many colors as you need.  Files should be a minimum of 300 dpi/resolution at the size you'd like them made.

Designing

The middle tall section should be within 0.6"-0.75" wide.  If you go thicker than 0.75" wide, it won't be able to easily fit the rolls of washi and defeats the point of the stand.  The section above the main post for holding washi is what you'd choose the total width from.  We do also make normal standees and they can be found here.

The most common base size is 3" and is a single sided print, so the side facing the table would be white and your design would be on the top side.  We can do larger base sizes, but around 3" is the most common.  We still use two pieces of plastic for a higher quality.

For the main section, please design both sides, unless you'd prefer it single sided.  The back art's shape needs to mirror the front.  It does not have to be the same that has just been flipped/mirrored, but the shape must match.

It's common for people to design an alternative backside with some small changes from the front art, or to keep them the same.

FAQs

Can I combine multiple designs within an order?
No.  Each design has its own separate labor and production, so we cannot do 2 designs, 50 each, priced for 100, etc.

What does double board mean?
Double board is when we have two pieces of plastic and the art is between them.  It provides a thicker quality and protects the art on both sides.

Are there any add ons I can do?
The most common is to add holographic to either one side or the base.  Each area that gets holo added increases the cost, so it's most common for people to choose it in one area.  Doing holo on all pieces is ok to do, but it can look a bit busy vs added a special element in a single location.  It's up to what you'd like and your budget.

Can I make smaller or larger sizes?
Yes, if you have a smaller or larger size please email us for pricing.  The pricing on these is based on the average size range that is typically used.

How long to they take to make?
On average, they take about 4 weeks for production

Can they be rushed?
We might be able to slim that down a little closer to 3-3.5 weeks, but we'd need to confirm with the factory.  Airmail can still take up to a week in transit, so in reality, that's bumping production time down to two weeks which can be tight.